| Stainless Steel |
| UNS#
| Alloy
| Specifications
| Sizes
|
| S13800 |
Stainless Steel 13-8 |
AMS 5629 TYPE 1, AMS 2300, CAP. ASTM-A-564 Grade XM-13 |
.75 - 3.5" DIA 
|
| S15500 |
Stainless Steel 15-5 |
Machinability of 15-5ph: 15-5ph may be machined in any of the attainable conditions, however machining in H1150M will yield best tool life.
Forming Stainless Steel 15-5: This alloy is capable of being only mildly formed. If forming is required, do so in the overaged condition for best results.
Welding Stainless Steel 15-5: When welding 15-6ph resistance methods or shielded fusion is recommended. Use AWS E/ER630 for filler metal.
Heat Treatment for Stainless Steel 15-5: CONDITION A--Soak at 1900 F(1038 C) for 1/2 hour, air cool. CONDITION H 900--Soak Condition A material at 900 F(482 C) for 1 hour, air cool. CONDITION H 925, H 1025, H1075, H 1100, H 1150--Soak Condition A material at desired temperature for 4 hours, air cool. CONDITION H 1150M--Soak Condition A material at 1400 F(760 C) for 2 hours, air cool. Heat to 1150F(621 C) for 4 hours, air cool.
Hot Working Stainless Steel 15-5: This alloy works well in all common hot working procedures. Material should be annealed after hot working for best heat treat response.
Cold Working 15-5PH: Cold work is restricted only by this alloys high initial yield strength. 15-5ph is not favored for cold working but can be moderately formed.
Annealing: 1900 F (1038 C) for 1 hour, rapid cooling. Also known as " solution treating."
Additional Specifications for 15-5PH:
Physical Data : Density (lb / cu. in.) 0.285
Specific Gravity 7.8
Specific Heat (Btu/lb/Deg F - [32-212 Deg F]) 0.11
Modulus of Elasticity Tension 29 |
.75 - 10" DIA
|
| S17400 |
Stainless Steel 17-4 |
AMS 5643, AMS 2203, CAP. ASTM-A-564 Grade 630 |
1 - 10" DIA
|
| S30300 |
Stainless Steel 303 |
AMS 5640, ASTM-A-582 |
|
| S30400 |
Stainless Steel 304 Condition A |
ASTM-A-276, ASTM-A-193, QQ-S-763 Rev E Amend 01, QQ-S-763 Rev F, AMS 5639, ASTM-A-479, ASME-SA-479, ASTM-A-320 |
1.5 - 5.5" SQUARE 
.75 - 10.5" DIA
|
| S30400 |
Stainless Steel 304 Condition B |
QQ-S-763(E Am. 1)(F), AMS-QQ-S-763, ASTM-A-276, ASTM-A-193 Grade B8 CL2 |
.5 - 2.5" DIA
.5 - 2" HEX 
|
| S30454 |
Stainless Steel 304L |
ASTM-A-276, QQ-S-763, AMS 5647, ASTM-A-479, ASME-SA-479 |
|
| S30500 |
Stainless Steel 305 |
ASTM-A-581 |
|
| S31600 |
Stainless Steel 316 Condition A |
MIL-S-7720, AMS 5648, QQ-S-763, ASTM-A-193, ASTM-A-276, ASTM-A-479, ASME-SA-479, ASTM-A- 320 |
1.5 - 5.5" SQUARE
.5 - 6" DIA
|
| S31600 |
Stainless Steel 316 Condition B |
MIL-S-7720A, QQ-S-763, E Amend. 1, QQ-S-763REVF, ASTM-A-276, ASTM-A-479, AMS-S-7720, ASTM- A-193 |
.5 - 1.5" HEX
|
| S32100 |
Stainless Steel 321 |
AMS 5645, ASTM-A-276, ASTM-A-479, QQ-S-763E AM1, QQ-S-763F, ASME-SA-479, ASTM-A-320 Grade B8T, ASTM-A-193 Grade B8T |
.375 - .75" DIA
|
| K66286 |
Stainless Steel A286 |
|
.375 - 12" DIA
|
|
